Call 800-349-4354

Welcome to Dixieline Stores !!

Conduit

Items 1 to 10 of 44 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • EMT Conduit 10' Length 1"

    EMT Conduit is designed to protect and route cables and conductors. It can be installed either exposed or concealed. Install it inside or outside using rain-tight fittings (not included). This EMT is made of an unthreaded galvanized steel and has an organic coating inside. Sizes Available: 1/2", 3/4" and 1" Learn More
  • PVC Conduit Body 1/2" LR

    For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Learn More
  • PVC Conduit Body 3/4" C

    The Carlon 3/4-inch Type C Conduit Body is for easy access and pulling of wires through conduit run. It will not rust or corrode and is both non-metallic and non-conductive. It is for use with schedule 40/80 non-metallic solvent weld fittings. Learn More
  • PVC Conduit Body 1/2" C

    Carlon E987D-CTN Non Metallic Conduit Body Type C Carlon E987D-CTN Non Metallic Conduit Body Type C Features: For Schedule 40/80 non-metallic conduit Type C conduit E987D: 1/2 trade size E987E: 3/4 trade size. Learn More
  • PVC Conduit Body 3/4" LL

    For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. - Type LL - Schedule 40/80 - Size: 3/4" Learn More
  • PVC Conduit Body 1/2" LL

    For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. - Type LL - Schedule 40/80 - Size: 1/2" Learn More
  • PVC Conduit Body 3/4" LB

    Carlon E986E-CTN Non Metallic Conduit Body Type LB Carlon E986E-CTN Non Metallic Conduit Body Type LB Features: For schedule 40/80 non-metallic conduit E986D-CAR: 1/2 trade size E986E-CAR: 3/4 trade size E986F-CAR: 1 trade size E986H-CAR: 1-1/2 trade size E986J-CAR: 2 trade size Learn More
  • PVC Conduit Body 1/2" LB

    Carlon E986D-CTN Non Metallic Conduit Body Type LB - For schedule 40/80 non-metallic conduit - Trade size: 1/2" Learn More
  • MC Aluminum Cable 12-2 50'

    For wet and dry locations. 90 degrees Celsius heat capacity. For branch feeder, power lighting, control signal, circuits and service power distribution in commercial industrial institutional and multi-residential buildings. For aerial cable on messenger; For cable trays and approved raceways. For concealed or exposed installations. Learn More
  • Non Metallic Flex 3/4" x 25'

    The Southwire Ultratite 3/4 in. x 25 ft. Nonmetallic Liquid Tight Conduit is for use in applications requiring movement, crossover connections or tight bends. CSA and UL listed. Can be used in agricultural buildings under exposed installations or concealed installations. Use to install and help protect electrical conductors in circuits rated 600 volts nominal or less Made with a spiral of rigid PVC reinforcement embedded within a flexible PVC wall Crush resistant construction Use in lengths longer than 6 ft. For use in applications requiring movement, crossover connections or tight bends Suitable for use with motor circuits for conductors of motor feeders, branch circuits and control circuits Ideal for use in conditions of installation, operation or maintenance where flexibility is required, or when the protection from liquids, vapors, solids and weather is needed Learn More

Items 1 to 10 of 44 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Please note: Not all products are available in all stores. Inventory can change quickly. Please call the store to verify stock and place items on hold. Prices shown are subject to change.
We reserve the right to override any of the information shown here at any time. Not responsible for typographical errors.