Call 800-349-4354

Welcome to Dixieline Stores !!

Electrical Fittings

Items 41 to 50 of 211 total

Set Descending Direction
per page

Grid  List 

  • 1-1/4" X 1/2" Reducing Washer

    1-1/4 in. x 1/2 in. RIGID Reducing Washer. It is designed to reduce the size of the knockout in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. Made from zinc plated steel and is corrosion resistant. Raised flanges allow for positive seating in the knockout. Trade sizes are clearly marked on each washer. UL and CSA listed. Learn More
  • 1-1/4" X 3/4" Reducing Washer

    Use the Halex 1-1/4 in. x 3/4 in. Conduit Reducing Washers to decrease the size of a knockout in a metal enclosure to accommodate smaller-sized electrical tubing. These washers are corrosion resistant as they are constructed from zinc-plated steel. Raised flanges allow for positive seating. Mount 1 washer on the inside of an enclosure and 1 on the outside for proper installation. UL and CSA safety listings. Designed for indoor or outdoor applications. Learn More
  • 1/2" KO Seal

    Designed to cover exposed knock-out holes in steel boxes and other metal enclosures, the Halex 1/2 in. Knock-Out Seals offer corrosion resistance. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc-plated steel. Designed for indoor and outdoor use. Learn More
  • 3/4" KO Seal

    The Halex 3/4 in. Knock-Out Seals are used to cover exposed knock-out holes in steel boxes and other metal enclosures. Suitable for indoor and outdoor use. The seals are made with zinc-plated steel for strength. Corrosion-resistant zinc-plated steel construction. Suitable for indoor and outdoor applications. Learn More
  • 1" EMT Compression Connector

    The Halex 1 in. EMT Compression Connector features a reversible locknut that is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Compatible with concrete-tight applications. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure. Body, nut and locknut are die-cast of high-strength zinc alloy. Steel-plated compression ring positively bonds conduit to the connector. Corrosion resistant. For indoor use. UL and CSA listed. Learn More
  • 1" EMT Set Screw Connector

    The Halex 1 in. EMT Compression Connector features a reversible locknut that is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Steel-plated compression ring positively bonds conduit to the connector. Compatible with concrete-tight applications. Concrete-tight when taped. Body, nut and locknut are die-cast of high-strength zinc alloy. Corrosion resistant. For indoor use. UL and CSA listed. Learn More
  • 1" EMT Set Screw Coupling

    Join lengths of EMT conduit together with this Halex 1 in. EMT Set-Screw Coupling which features Tri Drive screw heads for compatibility with Phillips, slotted and square screwdrivers. May be used indoors and in concrete tight applications. Concrete-tight 1/2' -1". Screw thread's retention design helps prevent it from vibrating loose. High-strength, die-cast zinc alloy. Zinc-plated steel set-screw for corrosion resistance. UL and CSA listed. Learn More
  • 1/2" EMT Pull Elbow EMT-To-EMT Set Screw

    Make a right-angle turn in a run of EMT conduit with the Halex 1/2 in. 90 EMT Pull Elbow. This die-cast zinc-alloy elbow includes a removable aluminum cover to aid in wire pulling. For indoor use. Use in dry locations only to connect EMT conduit together at a 90 bend. This is a set-screw style. Removable aluminum cover facilitates wire pulling. UL and CSA safety listings. Learn More
  • 3/4" EMT Pull Elbow EMT-To-EMT Set Screw

    For wire pulling made easy, choose the Halex 3/4 in. 90 EMT Pull Elbow. A detachable cover facilitates wire pulling. Die cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance. Removable aluminum cover facilitates wire pulling. For indoor use only. Use in dry locations only to connect EMT conduit together at a 90 bend. This is a set-screw style. UL and CSA listed. Learn More
  • 1/2" EMT Inside Corner Pull Elbow

    The Halex 1/2 in. Inside Corner EMT Pull Elbow joins sections of EMT conduit at an inside corner. A removable cover facilitates wire pulling. Die cast of high-strength zinc alloy with zinc-plated steel screws for corrosion resistance. Use indoors only to connect EMT conduit together on a 90 inside corner. Set-Screw type. UL and CSA listed. Learn More

Items 41 to 50 of 211 total

Set Descending Direction
per page

Grid  List 

Please note: Not all products are available in all stores. Inventory can change quickly. Please call the store to verify stock and place items on hold. Prices shown are subject to change.
We reserve the right to override any of the information shown here at any time. Not responsible for typographical errors.