Call 800-349-4354

Welcome to Dixieline Stores !!

Sensors

9 Item(s)

Set Descending Direction
per page

Grid  List 

  • CH Hanson Magnetic Stud Finder

    Features: - Strong long lasting rare earth magnets - Locates screws, nails and metal studs - Soft grip for easy grabbing and gentle touch - Hands free - No batteries needed! Learn More
  • Bosch Wall Scanner Multi-Sensor

    - 3 Selection Modes (Wood, Metal, AC Wiring) - Audible Detection Signal - With On/Off button - Illuminated Ring Indicates Detection Status - Ergonomic Soft-Grip - For secure grip and comfort - With automatic calibration for easy and precise detection - Illuminated Graphical LCD Display - Indicates mode, detection strength, and more - Automatic Center Finder - For locating center of detected wood or metal object - Deep Metal Detection Capability - Detects steel up to 4-3/4" (120 mm) deep in cured concrete - Multi-Mode Detection - For wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring Learn More
  • Magnetic Stud Finder

    Features: - Provides dependable detection of wall studs - Magnet works by locating steel nails and screws used to hold drywall to studs - Base of the stud finder is notched for convenient marking once studs are located Learn More
  • Zircon Stud Sensor i65

    Zircon's Stud Sensor i65 One-step quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. Patented CenterVision technology finds the center of studs in a single pass. Its easy-to-read display screen indicates directions, edges and center of studs, while WireWarning detection indicates the presence of live AC voltage. - Stud Scan mode locates the edges and center of wood or metal studs up to 3/4" inch deep (19mm) - DeepScan mode doubles the scanning depth to 1-1/2" inches (38mm) - LCD display indicates direction, edges, and center of studs - Patented SpotLite Pointing System and audio tone signals when the stud center is reached - Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2" inches (51mm) deep - ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud Battery: 9-V Alkaline (not included) Warranty: Limited 1 Year Manufacturer's Warranty Learn More
  • Zircon Stud Sensor SL

    Stud Sensor SL quickly and easily locates the edges of wood and metal studs behind drywall. The patented SpotLite Pointing System shines a beam of light on the wall to identify the target. Use the Stud Sensor SL to hang pictures and mirrors, anchor top heavy furniture such as bookcases, and mount flat-panel televisions on the wall. - Locates the edges of wood or metal studs up to 3/4" inch (19 mm) deep - Red LEDs light up every time a stud edge is approached - Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached - Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location - Patented TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is calibrated and ready to scan Battery: 9-V Alkaline (not included) Warranty: Limited 1 Year Manufacturer's Warranty Learn More
  • Zircon Stud Sensor Pro SL

    Stud Sensor Pro SL quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. The patented SpotLite Pointing System shines a beam of light on the wall to identify the target. - Stud Scan mode locates the edges of wood or metal studs up to 3/4" inch (19 mm) deep - DeepScan mode doubles the scanning depth to 1-1/2" inches (38 mm) - Red LEDs light up every time a stud edge is approached - Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached - Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location - Patented TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is ready and calibrated Battery: 9-V Alkaline (not included) Warranty: Limited 1 Year Manufacturer's Warranty Learn More
  • Zircon Stud Sensor Pro SL-AC

    Stud Sensor Pro SL-AC quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. The patented SpotLite PointingSystem shines a beam of light on the wall to identify the target, and WireWarning detection indicates the presence of live AC voltage. Its tough, ergonomic housing withstands everyday jobsite use. - Stud Scan mode locates the edges of wood or metal studs up to 34" inch (19 mm) deep - DeepScan mode doubles the scanning depth to 1-12" inches (38 mm) - Red LEDs light up every time a stud edge is approached - Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached - WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" inches deep - Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location - Patented TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is ready and calibrated Battery: 9-V Alkaline (not included) Warranty: Limited 1 Year Manufacturer's Warranty Learn More
  • Zircon MultiScanner i520

    MultiScanner i520 One-step quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets. - Stud Scan mode locates the edges and center of wood or metal studs up to 3/4" inch (19 mm) deep - DeepScan mode doubles the scanning depth to 1-1/2" inches (38 mm) - AC Scan finds and traces live, unshielded electrical wire up to 2" inches (51 mm) deep - Metal Scan mode locates nonferrous metal, such as copper pipe, up to 1-1/2" inches (38 mm) deep, and ferrous metal, such as rebar, up to 3" inches (76 mm) deep - WireWarning detection indicates the presence of live, unshielded electrical wire up to 2" inches (51 mm) deep in stud and metal scanning modes - ACT (Auto Correcting Technology) corrects common user errors automatically, such as when scanning begins over a stud Battery: 9-V Alkaline (not included) Warranty: Limited 1 Year Manufacturer's Warranty Learn More
  • Zircon Stud Sensor

    - Locates the edge of wood or metal studs behind drywall up to 3/4" thick. - LED light indicates when the edge of wood is detected Learn More

9 Item(s)

Set Descending Direction
per page

Grid  List 

Please note: Not all products are available in all stores. Inventory can change quickly. Please call the store to verify stock and place items on hold. Prices shown are subject to change.
We reserve the right to override any of the information shown here at any time. Not responsible for typographical errors.